Digital Procurement & Estimating

What Is a Quantity Surveyor Report? Cost Reports, Bank Progress Reports and Depreciation Schedules

A quantity surveyor report is any cost document a quantity surveyor prepares. Which one you need depends on who commissions it: your budget, your lender, or your tax return.

· DDDI Built Environment Research

What Is a Quantity Surveyor Report? Cost Reports, Bank Progress Reports and Depreciation Schedules

A quantity surveyor report is a cost document prepared by a quantity surveyor for one decision. The term is broad, because "QS report" is not one product. A cost plan, a bank progress certificate and a tax depreciation schedule are all QS reports. Yet they share almost nothing. Timing differs. So do the audience, the scope, and the person who pays.

So "do I need a QS report" is only half a question. The other half is which one, and who it is for.


Key Takeaways

  • A quantity surveyor report is defined by the engagement, not the profession. Scope lives in the engagement letter, where disputes start.
  • On a construction loan the lender appoints the quantity surveyor and is named as addressee, but the borrower usually pays.
  • Cost to complete, not percentage complete, decides whether a facility stays in balance.
  • A QS certificate is not a payment authority. Claim, certification and release are three separate steps.
  • "Registered quantity surveyor" means different things in different states. Victoria registers them; NSW asks for AIQS or RICS membership.

The Report Depends on Who Is Asking

ReportCommissioned byWhose interest it protects
Cost plan, elemental estimateOwner or developerThe owner's budget
Bill of quantities, tender evaluationClient, for tenderThe tender process
Development application cost reportApplicant, to satisfy councilThe council's fee base
Initial cost reportLenderThe lender
Progress or drawdown certificateLenderThe lender
Cost to complete reportLender, or borrower mid-buildThe lender's exposure
Insurance replacement cost reportOwner or strata managerThe owner's insurance cover
Tax depreciation scheduleProperty ownerThe owner's tax position

The first three rows are reports you commission for your own budget. They are a cost estimate, a bill of quantities for tender, and a tender evaluation report. None is compulsory. What they buy is a measured number, not a guess. Who prepares a bill of quantities covers that work.

A lender's first cost report also goes by three other names. It is called an initial quantity surveyor report, a financier's report and a pre-construction report. In consumer search, "QS report" most often means a depreciation schedule. That is a separate product.

The Lender's Reports: Initial Cost Report and Progress Certificates

Most builders first meet the profession here. It is also where the least gets explained.

The initial cost report

An initial cost report is a review of the building contract, the budget and the programme. It is done before a loan settles, and it is meant to be independent. It tests all three against the scope. That lets the lender see whether the numbers will deliver the building. The scope covers the contract sum, the paperwork, costs outside the contract, the contingency and builder capacity.

The progress certificate

A progress certificate states the value of work done on site to a given date. It is normally monthly. The builder submits a claim. The superintendent assesses it. Then, as a separate step, the lender's QS inspects the site and tests the claim against progress.

That split is what builders misread. A QS certificate is evidence for the lender, not a payment authority. The lender can accept the certified value and still hold back funds.

Who appoints, who pays, who receives

The lender appoints the consultant and is named as addressee. The borrower usually pays. Whether they get a copy depends on the engagement. The AIQS guidance note on Construction Financing Reports sets one scope for all. Confirm the panel first.

Most standard home builds are checked through the lender's valuation and progress inspection. A QS report is needed only where the valuer asks for one. Bank of Melbourne's broker guidance treats it as a cost to budget for "if the valuer determines they need one" (possibly at each progress inspection).

Cost to Complete: The Number That Governs the Loan

Cost to complete is what it would now take, from today's site condition, to finish the building. The loan is sized so that undrawn funds plus remaining equity cover that figure. If the figure rises above what is left, the loan is out of balance. The borrower then tops up equity before more drawdowns release. A routine monthly report can become a capital call.

Here is the arithmetic, as an illustration only. A $2,000,000 loan with $1,300,000 drawn leaves $700,000 undrawn. If cost to complete is $760,000, and no more equity is committed, the project is $60,000 out of balance.

The number moves for reasons other than overspending. Unapproved variations push it up. So do provisional sums above allowance, delays, and a shrinking contingency. All of that can happen while progress on site looks healthy. Track it in your own cashflow between certificates. The property development costs checklist shows where the contingency sits.

Who Can Prepare One

For tax work the Australian Taxation Office is specific. Taxation Ruling TR 97/25 accepts an estimate of construction expenditure from a suitably qualified person. That applies where the actual cost cannot be shown. It names "a quantity surveyor, who has expertise in the relevant type of construction" among those who may qualify. Valuers, agents, accountants and solicitors generally do not. For lender work there is no rule in law. The lender sets the panel, the title, the insurance and the addressee.

"Registered" is where readers get caught. Victoria registers quantity surveyors as building practitioners under the Building Act 1993 (Victorian Building Authority). NSW planning guidance asks instead for an AIQS-certified or RICS chartered quantity surveyor, not a state registration (Planning Circular PS 25-004). Ask which membership a lender or council really means.

Depreciation Schedules Are a Different Product

A tax depreciation schedule (often just called a depreciation schedule) is prepared after practical completion. It is for the owner, for the tax return. No lender is waiting for it. Homes built after 15 September 1987 qualify. The capital works deduction is 2.5 per cent a year for 40 years. The fee for the schedule is itself deductible.

Pricing here is public, unlike the rest of this market. Washington Brown lists home schedules at $385 to $770. For an established home, $590 to $770 is typical (page dated June 2024). Depreciator lists $385 to $715 plus regional travel, GST included (accessed October 2026).

The split that matters more than brand is desktop versus inspected. A desktop schedule relies on details you supply. An inspected one puts a surveyor on site.

What a QS Report Costs

Three fee models sit under one search term. Cost plans are quoted per project. The fee scales with scope and with design changes. Lender reports are priced against a scope the lender sets. A fee quoted without those details means little. Depreciation schedules are the only one sold at fixed, published prices. The full comparison is in how much a bill of quantities costs.

If You Only Need Quantities, You Do Not Need a QS Report

Most builders who search this term need none of the reports above. They need measured quantities from drawings, so they can price a job. That product is a take-off or a bill of quantities. It comes with no AIQS membership, no lender's duty of care, and nobody's addressee but yours. It is a measurement product, not an assurance product. Quantity take-off services covers what to check before you engage one.

A fixed-fee take-off service sits outside this market. Scaleline, a DDDI Group company, measures new homes from drawings. It does not price them. It is not an AIQS-certified quantity surveying practice. It cannot sign anything a bank will rely on.


Frequently Asked Questions

How much does a QS report cost?

It depends which report. Published residential depreciation schedules run about $385 to $770 including GST. Cost plans and lender reports are quoted against a scope set by the client or lender.

What does a QS report include?

A cost plan includes measured quantities, rates and a cost summary by trade. An initial cost report covers the contract, budget, programme and contingency. A progress certificate covers work completed, variations and cost to complete.

Do I need a quantity surveyor for a construction loan?

Not always. Most standard home builds go through the lender's valuation and progress inspection. Development files and owner-builder construction are more likely to need a QS report.

Is a QS report the same as a depreciation schedule?

No. A depreciation schedule is prepared after construction finishes, for the owner's tax deductions. A cost report or progress certificate is prepared during the project, for a funding decision.

Who can prepare a QS report in Australia?

For tax, TR 97/25 names a quantity surveyor with expertise in the relevant construction type. For lender work the lender sets the panel, designation (such as AIQS Certified Quantity Surveyor) and insurance requirements.

Where This Leaves a Builder

The useful question is not "do I need a quantity surveyor report". It is "which report, commissioned by whom, and what does it commit me to". For a lender report the lender controls the appointment. Confirm the panel first. For a depreciation schedule, it is a post-completion tax product with published prices. For measured quantities to price a new home, you want a take-off.

Scaleline is a DDDI Group company, and DDDI Group publishes this article. Links to Scaleline are related-party referrals, not independent recommendations. Scaleline measures new homes from drawings and does not price them, and it is not an AIQS-certified quantity surveying practice. It does not prepare lender progress reports, cost to complete reports or tax depreciation schedules.

This guide is researched and edited by the DDDI Built Environment Research desk, which publishes industry research on property development and construction in Australia. It is fact-checked against primary sources before publication, and corrections can go to the research desk through the contact page. The editorial standard behind these articles is described on DDDI's about page.

Get Trade Quotes