A quantity surveyor fee is what a client pays a consultant to measure, cost or report on a project. There is no published market rate for a bill of quantities in Australia. Five models exist: hourly, percentage of building cost, fixed fee, per-trade take-off, and in-house salary. They are not five prices for the same document.
Key Takeaways
- Five models, five purchases. An hourly rate buys time, a percentage buys an engagement, a fixed fee buys a document, a per-trade take-off buys quantities, a salary buys a person.
- Only two models publish checkable prices: per-trade take-off ($89 to $499 a trade) and the in-house salary ($130,000 to $165,000 in year one).
- No credible published average exists for a BOQ itself. One Australian fee guide prices every adjacent service, then declines to price a BOQ.
- Percentage fees run 0.5% to 3.0% — a sixfold spread on identical construction value.
- GST treatment is stated on some published fees and not others. Confirm it before comparing quotes.
What a bill of quantities costs, and what the question hides
No Australian source publishes a single price for a bill of quantities. That includes the guides that price everything around it. Build Metric's 2026 fee guide prices the reports that sit near a BOQ. A DA cost report runs $600 to $700 plus GST. A cost plan runs $3,000 to $6,000+. A dilapidation report runs $400 to $700. For a bill of quantities it says: "Scoped hourly or fixed per trade" (Build Metric, updated 19 October 2026). No number.
That refusal is the honest answer. Two documents both called a bill of quantities differ by an order of magnitude in effort. It depends on the trades measured and on how complete the drawings are.
| Model | What the fee buys | Published price? |
|---|---|---|
| Hourly rate | Time, usually advisory or review | Range only |
| Percentage of construction cost | An engagement across stages | Range only |
| Fixed fee per dwelling | One whole-home document | Yes, per job |
| Per-trade take-off | Quantities for one trade | Yes, widely |
| In-house salary | A person, all year | Yes, surveys |
Two nearby products are often mistaken for a building BOQ. For example, a depreciation schedule is a quantity surveyor's report but not a BOQ. Build Metric prices it at $550 to $900. A DA cost report is $600 to $700 plus GST. Neither tells you what a tender BOQ costs. For the document itself, see what a bill of quantities is.
An hourly rate is a fee charged per hour worked, with the total following however long the job takes.
Hourly quantity surveyor rates
Published Australian rates cluster between $120 and $220 an hour in 2026. Build Metric quotes $120 to $220 (Build Metric, 19 October 2026). As Estimation quotes $120 to $250 (As Estimation, 27 March 2026). An Adelaide guide quotes $150 to $350 (Dunvei, 21 May 2026). Feasly quotes a lower entry point. It gives a base rate of $61 an hour, with senior staff at $100 to $150+ (Feasly, 20 November 2025).
The number most often repeated online is stale. For example, an archived Whirlpool thread from 2014 quotes "$80 and $150/hour" (Whirlpool forums).
None of the four current sources states its GST treatment. A $150 rate becomes $165 inclusive.
The structural risk with hourly pricing is that scope risk sits with the buyer. An incomplete drawing set means more hours and a larger invoice with no ceiling. Ask for a written estimate of hours and a stated scope.
A percentage fee is set as a share of the construction cost, so it rises with the size of the project.
Percentage of construction cost
Percentage fees typically run 0.5% to 3% of building value, falling as project value rises. Build Metric quotes 0.5% to 2.5% for large or complex projects (Build Metric, 19 October 2026). Feasly quotes 0.5% to 2%, "often 1-1.5% for comprehensive services spanning feasibility through final account" (Feasly, 20 November 2025). As Estimation and Dunvei both quote 1% to 3%. A practising firm states the same band in public: "QS fees typically sit between 1-3% of the project value" (J Squared Quantity Surveying, 17 April 2026).
Take a $450,000 build, as simple arithmetic only. At 0.5% the fee is $2,250. At 3.0% it is $13,500. Nothing about the house explains the sixfold gap.
A percentage fee often buys an ongoing engagement, not one document. Feasly's 1% to 1.5% band covers feasibility through final account. That means cost planning, tender review, progress claims. To weigh that against a fixed fee for one BOQ is to compare a retainer with a report.
At the top of the market there is a public anchor you can check. A registered quantity surveyor's cost report went to the City of Sydney for a $72 million commercial job. It records fees at 5% of construction cost (City of Sydney ePlanning, 29 September 2025). That is one document for one project, not a market rate.
Fixed fees: per trade and per dwelling
Fixed fees are the only model where a builder sees a price before sending a drawing. Published per-trade prices run from about $89 to $499 a trade. Whole-home fixed fees run from about $499 to $1,599 per job. Every figure below was checked on 30 October 2026 unless dated otherwise.
| Provider | What you get | Price | GST |
|---|---|---|---|
| Matrak AI Takeoff | One trade, whole drawing set | A$89 per trade; A$1,370 for 20 credits | Not stated |
| 3D Design Studios | Up to 200 m² of material | From $120 | +GST |
| Kelly Estimating | One trade, 1 revision | $195 per trade; monthly from $1,500 | "Includes GST where applicable" |
| Trade Takeoff | Single trade takeoff | $499; up to 5 trades $1,499 | Ex-GST (site-wide) |
| EstiFlow | Residential / duplex / townhouse | $499 / $599 / $899 / $1,099 / $1,599 | Not stated |
| Newin (27 March 2026) | Reports | From AUD $990 | Not stated |
These are not the same product. A$89 buys a first-pass AI-drafted takeoff with an hour of human help. $499 buys a measured single-trade takeoff. EstiFlow states on its own page that it is "a digital estimating service, not a licensed Quantity Surveyor firm".
A commercial BOQ costs an order of magnitude more. As Estimation prices BOQ work at $4,000 to $10,000+ (As Estimation, 27 March 2026), against $499 for a residential per-trade takeoff. That is not an anomaly. A tender-stage BOQ covers dozens of trades and needs a formal measurement rule. A firm with professional indemnity cover prices it. Newin adds that a Builders BOQ is "usually double that of a construction cost estimate" (Newin).
The specification, not the house size, sets the price. You settle it before you ask for a quote. Know first what the columns of a checkable BOQ should contain.
What an in-house estimator costs instead
Hiring an estimator costs $130,000 to $165,000 in the first year, all-in. Build Metric states: "A full-time estimator costs between $130,000 and $165,000 in the first year when superannuation, leave, workers compensation, and specialist recruitment fees are included" (Build Metric, 18 May 2026).
Two caveats apply. The same publisher gives a different figure three months later. A 29 July 2026 release puts a mid-level construction estimator at "closer to $175,000 in the first year" with on-costs (Medianet, 29 July 2026). And salary is not the cost of employment. SEEK's October 2026 data puts the advertised average for estimators in construction at $99,177 across 1,779 ads. It notes that some listed salaries include superannuation and some do not (SEEK).
The case against a full-time hire for a small builder is workload, not price. Build Metric puts a single estimator at 8 to 12 estimates a month. That is full capacity. Salary is fixed across the year. A new-home pipeline is not.
Scaleline's published fees, as one dated data point
Scaleline is a DDDI Group company, and DDDI Group publishes this article. Links to Scaleline are related-party referrals, not independent recommendations. Scaleline measures new homes from drawings and does not price them; it is not an AIQS-certified quantity surveying practice.
Scaleline publishes its fees: $449 per trade package, $1,290 per single dwelling, and $3,900 per month, excluding GST, checked 30 October 2026 (Scaleline pricing). The monthly plan includes three whole-home take-offs, with extra jobs at $990.
Treat that as one dated example, not a benchmark. It sits at the upper end of the per-trade range above. That is consistent with sourced, checked measurement, not an automated first pass. It is not evidence that another provider overcharges. Do not use it to negotiate against a quote prepared under a different scope.
Why two BOQ quotes for the same house differ
The fee tracks scope, drawings and revision handling far more than the house.
| Driver | What changes the fee |
|---|---|
| Trades in scope | One quote covers five trades, another twelve. Most residential projects need 5 to 12 trades to be fully priced (Kelly Estimating). |
| Quantities or rates | A priced estimate applies labour and material rates; a take-off returns quantities only. |
| Source per line | A BOQ citing the drawing page and dimension behind every quantity costs more to produce, and is the only kind you can check. |
| Revisions and turnaround | One free revision is common; a second drawing set is usually a new job. Rush work is priced up. |
Two of these are qualification questions rather than price questions. Who prepares a bill of quantities sets out the difference between a registered quantity surveyor, an estimator and a take-off service. If you are choosing between providers rather than models, how to evaluate a quantity take-off service covers the checks that matter. If the alternative is software, the best construction estimating software in Australia covers licence cost. For a digital takeoff, see the construction takeoff software guide. It explains what such a tool measures before it prices.
Frequently Asked Questions
How much does a quantity surveyor charge per hour?
Published Australian rates in 2026 run from about $120 to $220 an hour, with senior and dispute work at the top. As Estimation quotes $120 to $250 and an Adelaide guide $150 to $350. None states GST treatment, so confirm it in the quote.
How much does it cost to get a bill of quantities?
There is no published market rate. The checkable fixed prices are per trade: about $89 to $499, with whole-home fixed fees from roughly $499 to $1,599. A tender-stage BOQ for a commercial project is a different product, quoted at $4,000 to $10,000+.
Is a bill of quantities worth the fee?
The defensible reason to buy one is comparability. A shared quantity list means every trade prices the same numbers. A competitive quote then reflects margin rather than a padded quantity. That is a structural argument, not a saving you can promise. No credible Australian figure quantifies the saving.
Do I need a quantity surveyor, or can an estimator prepare it?
A bank or depreciation report needs a registered quantity surveyor. A new-home BOQ for trade pricing does not, which is why estimator-led and take-off services exist.
Is GST included in quantity surveyor fees?
Often unclear. Kelly Estimating states its pricing "includes GST where applicable"; several other fee pages state no treatment. A $1,290 fee quoted ex GST is $1,419 inclusive.
The frame that holds
Pick the model before you compare the price. Date every figure to the day you checked it, because several ranges here moved within twelve months. State the GST base, because that is the quietest error in a fee comparison. Then ask what predicts whether the document is worth its fee: what is measured, and what is sourced, line by line.
If you want to see a fixed, published fee against a defined scope, Scaleline's pricing page lists the rates. What an in-house estimator really costs sets the salary comparison out in full.
Scaleline is a DDDI Group company, and DDDI Group publishes this article. Links to Scaleline are related-party referrals, not independent recommendations. Scaleline measures new homes from drawings and does not price them; it is not an AIQS-certified quantity surveying practice.
This guide is researched and edited by the DDDI Built Environment Research desk. It publishes industry research on property development and building in Australia. Every article is fact-checked against primary sources before publication. Corrections can go to the research desk through the contact page. The editorial standard behind these articles is described on DDDI's about page.

